BT
Business

What are the system specifications of the Cisco Aironet 1100 Series Access Point?

The system specifications of the Cisco Aironet 1100 Series Access Point are as follows:

FeatureSpecifications
Software
  • Cisco IOS Software Release 12.3(8)JA or later (autonomous).
  • Cisco IOS Software Release 12.3(11)JX or later (Lightweight Mode).
  • Cisco Unified Wireless Network Software Release 4.0 or later.
Data rates supported802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
Network standardIEEE 802.11b or IEEE 802.11g
UplinkAutosensing 802.3 10/100BaseT Ethernet
Frequency band802.11g:

  • 2.412 to 2.462 GHz (FCC)
  • 2.412 to 2.472 GHz (ETSI)
  • 2.412 to 2.484 GHz CCK: (TELEC)
  • 2.412 to 2.472 GHz Orthogonal Frequency Division Multiplexing (OFDM): (TELEC)
Network architecture typeInfrastructure, star topology
Wireless medium
  • 802.11g: OFDM
  • 802.11b and 802.11g: Direct sequence spread spectrum (DSSS)
Media access protocolCarrier sense multiple access with collision avoidance (CSMA/CA)
ModulationOFDM:

  • BPSK @ 6 and 9 Mbps
  • QPSK @ 12 and 18 Mbps
  • 16-QAM @ 24 and 36 Mbps
  • 64-QAM @ 48 and 54 Mbps
DSS:

  • DBPSK @ 1 Mbps
  • DQPSK @ 2 Mbps
  • CCK @ 5.5 and 11 Mbps
Operating channels802.11g ETSI: 13; Americas: 11; TELEC (Japan): CCK-14, OFDM-13
Nonoverlapping channelsThree
Receive sensitivity802.11b:

  • 1 Mbps: -94 dBm
  • 2 Mbps: -91 dBm
  • 5.5 Mbps: -89 dBm
  • 11 Mbps: -85 dBm
802.11g:

  • 1 Mbps: -95 dBm
  • 2 Mbps: -91 dBm
  • 5.5 Mbps: -89 dBm
  • 6 Mbps: -90 dBm
  • 9 Mbps: -84 dBm
  • 11 Mbps: -88 dBm
  • 12 Mbps: -82 dBm
  • 18 Mbps: -80 dBm
  • 24 Mbps: -77 dBm
  • 36 Mbps: -73 dBm
  • 48 Mbps: -72 dBm
  • 54 Mbps: -72 dBm
Available transmit power settings802.11g:

CCK:

  • 100 mW (20 dBm)
  • 50 mW (17 dBm)
  • 30 mW (15 dBm)
  • 20 mW (13 dBm)
  • 10 mW (10 dBm)
  • 5 mW (7 dBm)
  • 1 mW (0 dBm)
OFDM:

  • 30 mW (15 dBm)
  • 20 mW (13 dBm)
  • 10 mW (10 dBm)
  • 5 mW (7 dBm)
  • 1 mW (0 dBm)
Maximum power setting will vary according to individual country regulations.
RangeIndoors (distance across open office environment):

  • 90 ft (27 m) @ 54 Mbps
  • 95 ft (29 m) @ 48 Mbps
  • 100 ft (30 m) @ 36 Mbps
  • 140 ft (42 m) @ 24 Mbps
  • 180 ft (54 m) @ 18 Mbps
  • 210 ft (64 m) @ 12 Mbps
  • 220 ft (67 m) @ 11 Mbps
  • 250 ft (76 m) @ 9 Mbps
  • 300 ft (91 m) @ 6 Mbps
  • 310 ft (94 m) @ 5.5 Mbps
  • 350 ft (107 m) @ 2 Mbps
  • 410 ft (125 m) @ 1 Mbps
Outdoors:

  • 110 ft (34 m) @ 54 Mbps
  • 200 ft (60 m) @ 48 Mbps
  • 225 ft (69 m) @ 36 Mbps
  • 325 ft (100 m) @ 24 Mbps
  • 400 ft (122 m) @ 18 Mbps
  • 475 ft (145 m) @ 12 Mbps
  • 490 ft (150 m) @ 11 Mbps
  • 550 ft (168 m) @ 9 Mbps
  • 650 ft (198 m) @ 6 Mbps
  • 660 ft (201 m) @ 5.5 Mbps
  • 690 ft (210 m) @ 2 Mbps
  • 700 ft (213 m) @ 1Mbps
Ranges and actual throughput vary based upon numerous environmental factors, so individual performance may differ.
SNMP complianceMIB I and MIB II
AntennaIntegrated 2.2 dBi diversity dipole antennas
SecuritySecurity standards:

  • WPA
  • WPA2 (802.11i)
  • Cisco TKIP
  • Cisco message integrity check (MIC)
  • IEEE 802.11 Wired Equivalent Privacy (WEP) keys of 40 bits and 128 bits
802.1X EAP types:

  • EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
  • Protected EAP-Generic Token Card (PEAP-GTC)
  • PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)
  • EAP-Transport Layer Security (EAP-TLS)
  • EAP-Tunneled TLS (EAP-TTLS)
  • EAP-Subscriber Identity Module (EAP-SIM)
  • Cisco LEAP
Encryption:

  • AES-CCMP encryption (WPA2)
  • TKIP (WPA)
  • Cisco TKIP
  • WPA TKIP
  • IEEE 802.11 WEP keys of 40 bits and 128 bits
Status LEDsThree indicators on the top panel report association status, operation, error/warning, firmware upgrade, and configuration, network/modem, and radio status.
Dimensions4.1 in. (10.4 cm) wide; 8.1 in. (20.5 cm) high; 1.5 in. (3.8 cm) deep
Weight10.5 oz. (297 g)
Environmental
  • 32–104° F (0-40° C)
  • 10–90% humidity (noncondensing)
System memory
  • 16 MB RAM
  • 8 MB FLASH
Input power requirements
  • 100–240 VAC 50-0Hz (power supply)
  • 33–57 VDC (device)
Power Draw4.9 watts, RMS
WarrantyOne year
Wi-Fi certificationWi-Fi certified

  • Bookmark and Share


BT Business site map

Sorry for interrupting your journey

We're working on improving our website so you get the information you want quickly. Please help us by providing your phone number. We apologise for the short delay and thanks for your patience.

Please enter a valid UK Phone number (note: numbers need to start with 0 and contain 10-11 numbers).

Reason for your visit.



Please wait...

Sorry for interrupting your journey

We're working on improving our website so you get the information you want quickly. Please help us by providing your phone number. We apologise for the short delay and thanks for your patience.

Please enter a valid UK phone number.(note: numbers need to start with 0 and contain 10-11 numbers).

Reason for your visit.



Please wait...