How do I program an extension number, external telephone number or feature code under a button?

You can programme buttons (memory keys) for one-touch dialling of internal or external telephone numbers. They can also be programmed for system Features such as Speed Dial, Last Number etc.

All programming MUST be done with the Handset replaced & the terminal free of calls. To check what a Key is currently programmed for Key Inquiry press Feature *0 Then press the Key.

Keys used for lines, answer or Handsfree/Mute cannot be used as autodial keys.

Autodial key programmed for an external number

  1. Press FEATURE *1. The display briefly shows External autodial then Press a key.
  2. Press the key you want to programme. (This step is not necessary on the M7100 or M7100N telephone which has only one memory key.) 
  3. If you want this autodial key to use a particular line or line pool, select that line or line pool. 
  4. Enter the number. Press HOLD or OK when you are finished. The display shows Programmed.


Autodial key programmed for an extension number

  1. Press FEATURE *2. The display briefly shows Internal autodial then Press a key
  2. Press the key you want to programme. (This step is not necessary on the M7100 or M7100N telephone which has only one memory key.) The display shows Extn#:_
  3. Enter the number. The display shows Programmed.


Autodial key programmed for a System Feature

  1. Press FEATURE *3. The display briefly shows Program Features then Press a key
  2. Press the key you want to programme. (This step is not necessary on the M7100 or M7100N telephone which has only one memory key.) The display shows Feature Code
  3. Enter the Feature code E.G.: System Speed Dial = Feature 0
  4. The Display Shows Programmed.

Note: Autodial numbers must be programmed to memory keys and not to line keys, intercom keys, the Handsfree/Mute key, or Answer keys.

 
 

Artboard 1 copy 2 Contact us


Chat online, call or email us.

Contact us