I'm trying to ring a mobile phone but keep getting an error message. What can I do?

Trying to dial a mobile phone and getting an 'Access denied' error message. Just follow the steps below to fix it -

  1. Connect to your MN3300 system.
  2. Go to the ARS Digits Dialed form.
  3. Look for the entry to dial a mobile, usually 907 and note the route number.
    In our example, the route number is 3.

    ARS Digits Dialed form
  4. Next, go to the ARS Routes form and look at the ARS route details and make a note of  the COR group number. Our example below shows that the ARS route is 3 and that the COR group number is 3.

    ARS Routes form
  5. Go to the Class of Restriction Groups form. As you can see below in our example, COR Group 3 has 1, 2, 10-60. This means that if the current phone has a COR of 1 or 2 or between 10-60, it will NOT be able to dial 907/mobiles. Next you need to check the COR on the phone.

    Class of Restriction Group
  6. Go to the Station Attributes form and check what the phones current COR is. In our example below, for extension 2011, the COR is 2.

    Station Attributes form
  7. If needed, change the phone COR number.

    Our examples above show that we have;

    COR Group number = 3 with a Class of Restriction (COR) = 1, 2, 10-60
    The phone COR = 2 for Day, Night1 and Night2

    For the phone to be able to dial a mobile number, the phones COR number should not be in the COR Group. Our phone has a COR 2 and the COR Group 3, also shows a 2 so the phone will not be able to dial 907.

    To resolve this, the phone needs a COR that does NOT show in the COR Group. In our case, giving the phone a COR 3 will allow us to dial mobiles. We could also use COR 4, 5, 6, 7, 8, 9, but this would possibly give further outbound access like international, 0845 etc. depending on what the ARS digits dial are set for.

Artboard 1 copy 2 Contact us


Chat online, call or email us.

Contact us