By default your BT Business Hub 2700/2701 (aka BT Business Hub 2) is set to the older WEP standard. Most wireless adapters now support the more secure WPA and WPA2 standards. By following the steps below you can change between the 3. Please note if the setting used is too high for your wireless adapter you'll need to connect to your hub via Ethernet so we'd recommend being near your hub when changing the wireless settings.
- Open your internet browser and type in http://home or http://192.168.1.254, press Enter.
- Click on the Wireless icon – the Wireless Configuration screen will appear.
- In Wireless Security, select the Authentication Type required.
- Click Save.
- You may be asked to enter your password – if you haven't changed it, the default password is the same as the serial number on the side of your Hub.
If you have a BT Business Hub 3 see How do I change my BT Business Hub 3 wireless security settings?
If you have a BT Business Hub 5 see How do I change my BT Business Hub 5 wireless security settings?